Cylinder Block for 2013 Ram C/V
Mopar Short Block Engine Kit
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. New Part For Core Return. Item 13 Also Contained in Short Block Engine Kit.
Mopar Short Block Engine Kit
IMPORTANT NOTE***When A Long Block Engine Is Replaced New Or Remanufactured The Fasteners For The Transmission Bracket To Transmission Case MUST Be Replaced For The Orginal Fasteners Are A One Time Use Only. Order Fastener Kit PN 68329056AA. See important note for contents. OE Equivalent Supporting Sustainera.
Mopar Mounting, Transmission To Cylinder Block. Transmission To Engine. Transmisasion To Cylinder Block.
Mopar M24x1.50. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Coolant Drain. Main Oil Gallery. Oil Control Valve. Item 13 Also Contained in Short Block Engine Kit. Coolant Passage. Oil Gallery Side Of Cylinder Block. Rear Of Cylinder Block.
Mopar All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
Mopar Hex Head Bolt And Coned Washer, Mounting
Mopar Mounting, Main Bearing Crossbar To Cylinder Block. Pump Bracket To Engine. M8x1.25x40.00. Tensioner Bracket To Cylinder Head. Main Bearing Cap Cross Bar To Cylinder Block.
Mopar Pin
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Tensioner Arm. Item 13 Also Contained in Short Block Engine Kit. Panel Attaching Pins. Timing Chain Drive. Timing Chain Guide.
Mopar Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Included With Short Block Engine. MUST Be Installed On Cylinder Block Before Engine Is Installed.
Mopar Front Splash Shield To Oil Pump. M5x.08x16.00. Piston Oil Cooler Jet. Door Handle to Door M5x16.
Mopar Hex Flange Head Bolt, Mounting, Inner
Inner Main Bearing Cap To Cylinder Block. Inboard Main Bearing Cap To Cylinder Block. M11x1.50x94.00.
Mopar Hex Flange Head Bolt, Mounting, Outer
M8x1.25x97.00. Main Bearing Cap To Cylinder block.
Mopar Core Plug
Water Jacket Core. Two [2] Per Cylinder Head. Coolant Front And Rear Of Cylinder Head. Back Of Lower Intake Manifold. Mega Cab. Oil Gallery. [1.25 Diameter]. 1 1/4.